All help topics
Toner & drum help

Replace Ricoh SP330DN/SP330SFN toner

Read the correct toner message and seat the new cartridge until it clicks.

1 min read

SP330SFN shows “Out of Toner: Black” when replacement is needed. SP330DN shows “Replacement Required: Print Cartridge”. A “Soon” message means have a replacement ready.

Fit the replacement

  1. Remove paper from the bypass tray and close it. Press the side button and lower the front cover.
  2. Hold the center of the used cartridge, lift it slightly and pull it out horizontally. Put it on paper; do not shake the used cartridge.
  3. Unpack the new cartridge and rock it side to side five or six times.
  4. Slide it in horizontally. At the end, raise it slightly, push it fully in and press down until it clicks.
  5. Close the front cover and wait for the initial screen or ready state.
Get cartridge help
Technical references

Still need a hand?

Tell us your printer model and what’s happening. For an order, include your order number.

Contact Ink Hero

Cart

Subtotal
Estimated shippingAt checkout
Estimated total

Before tax. Final total confirmed at checkout.

Checkout
View cart

Essential cookies keep your basket and checkout working. With your permission, Google measures site use, and Google and Microsoft personalise ads and measure purchases. Your choices apply to Shopify checkout too. You can change them at any time.

Privacy Policy