Toner & drum help Brother MFC-7360N family: reset replacement toner Use Clear and the numeric keypad for the older MFC-7360N/7460DN/7860DW panel.
1 min read This is the keypad version of the older monochrome reset. Its Clear button and typed toner code differ from the newer MFC-L2700DW procedure.
Use only after replacing the toner Fit a new, full, compatible toner cartridge before using this procedure. Resetting an empty or partly used cartridge will not refill it and will make its recorded life misleading. Keep the existing drum counter unchanged.
Check the local model and toner Models covered: MFC-7360N, MFC-7460DN, MFC-7860DW. Use *11 for TN420 standard toner or *12 for TN450 high-yield toner.
Reset after fitting the new toner 1 Keep the printer on with the new toner installed and open the front cover.2 Press Clear to reach the replacement prompt. Do not answer Yes or 1 to replace a drum.3 For a standard toner, type star, 1, 1 in that order. For a high-yield toner, type star, 1, 2.4 After Accepted appears, wait about two seconds, then close the front cover. If the menu or message differs Stop if the listed controls or toner entry are missing. Close the cover and send Ink Hero your exact model, cartridge number and a photo of the message. A counter reset cannot repair a faulty chip or make the wrong cartridge compatible.
Help with a toner reset Technical references