Toner & drum help Brother HL-3170CDW: reset replacement colour toner Use Secure and Cancel on this older colour HL control panel.
2 min read The HL-3170CDW and the listed HL-3140CW use the Secure/Cancel shortcut. The model number matters: the newer HL-L3230CDW uses Back/Cancel instead.
Use only after replacing the toner Fit a new, full, compatible toner cartridge before using this procedure. Resetting an empty or partly used cartridge will not refill it and will make its recorded life misleading. Keep the existing drum counter unchanged.
Check the local model and toner Models covered: HL-3140CW, HL-3170CDW. Choose the black STD entry for TN221BK; choose the matching color HC entry for TN225 cyan, magenta or yellow. A black cartridge in a mixed high-yield color pack still uses its own black capacity.
Choose only the toner you replaced K or BK identifies black; C is cyan, M is magenta and Y is yellow. STD means standard capacity and HC means high capacity. Reset each newly replaced color separately; leave other toner and drum entries alone.
Reset after fitting the new toner 1 With the printer on and the new toner fitted, open the top toner-access cover.2 Press Secure and Cancel together to open the toner reset list.3 Use the arrow keys to choose only the replaced color and correct capacity, then press OK.4 At Reset/Exit, press the up arrow to reset. After Accepted appears, close the top cover and let the printer return to Ready. If the menu or message differs Stop if the listed controls or toner entry are missing. Close the cover and send Ink Hero your exact model, cartridge number and a photo of the message. A counter reset cannot repair a faulty chip or make the wrong cartridge compatible.
Help with a toner reset Technical references