Brother HL-L2350DW/HL-L2375DW: reset the toner counter
Enter the toner menu with Back and Go, then confirm with the minus key.
1 min readUse this for the listed one-line LCD models with physical Back and Go buttons. A General Setup → Replace Toner → Continue setting is a different feature and does not perform this counter reset.
Reset after fitting the new toner
- Keep the printer on, fit the new toner and open the front cover.
- Hold Back and Go together for one to two seconds. Release both and immediately press Back once more.
- Use plus/minus to select the installed capacity: TNR-STD for standard toner or TNR-HC for high-yield toner. Press OK.
- At Reset/Exit, press minus to reset. After Accepted appears, close the front cover.