Toner & drum help Brother HL-L2350DW: replace and reset the drum A new-drum guide for the HL-L2350DW, with its closed-cover and Down-arrow reset.
1 min read In this guide Replace the drum carrier Reset the HL-L2350DW drum counter Use this guide for the HL-L2350DW . Its closed-cover reset differs from the older HL-L2340DW procedure.
UK drum code The UK HL-L2350DW uses the DR2400 drum family with TN2410/TN2420 toner. Check the exact printer model before ordering.
Reset only for a new drum Replace the drum first. Resetting an old drum changes its life estimate; it does not repair wear or add toner. These steps do not reset the toner cartridge.
Replace the drum carrier 1 With the printer on, open the front cover and remove the combined toner and drum assembly.2 Press the green lock lever to release the toner. Unwrap the new drum and remove the protection supplied with it.3 Lock the toner into the new drum, refit the assembly and close the front cover. Reset the HL-L2350DW drum counter 1 Keep the printer on with the front cover closed.2 Press OK and the Up arrow together.3 Press OK for Drum , then press the Down arrow to reset its counter. Handle the assembly by its frame Keep fingers off the drum surface and electrical contacts. Leave the new drum wrapped until you are ready to fit it, and keep it away from strong light.
Different panel or model? Use the instructions for the model printed on your printer. Do not try this sequence on an HL-L2340DW, a touchscreen printer or another model just because its cartridge looks similar.
Find my drum Ask Ink Hero for help Technical references