Canon PIXMA MG5750: fit PGI-570/CLI-571 ink tanks

Release one tank at a time and check the replacement clicks into its labelled slot.

1 min read

For the PIXMA MG5750, use the local PGI-570/CLI-571 family, including the listed XL options.

Replace the indicated tank

Turn the printer on. Open the front cover, then raise the operation panel fully and open the output tray. Wait for the holder to stop.
Press the affected tank’s tab and lift it out. Replace tanks one at a time.
Follow the replacement’s marked tape, vent and protective-cap instructions. Keep fingers off the outlet and do not squeeze the tank.
Insert the tank’s front end at an angle into its matching slot. Press the top until it clicks and its lamp lights.
Keep all five tanks installed. Lower the operation panel gently and respond to the screen. Let automatic cleaning finish.

Technical references