Toner & drum help Brother HL-L3270CDW/MFC-L3750CDW: touchscreen toner reset Select the replaced color and capacity on the touchscreen after the Back/Cancel shortcut.
2 min read Use this for the listed color touchscreen models. Reset only a newly replaced toner, even when installing a four-color pack.
Use only after replacing the toner Fit a new, full, compatible toner cartridge before using this procedure. Resetting an empty or partly used cartridge will not refill it and will make its recorded life misleading. Keep the existing drum counter unchanged.
Check the local model and toner Models covered: HL-L3270CDW, MFC-L3750CDW, MFC-L3770CDW. The US family is TN223 standard / TN227 high yield. Choose HC for a new TN227 cartridge of the matching color.
Choose only the toner you replaced K or BK identifies black; C is cyan, M is magenta and Y is yellow. STD means standard capacity and HC means high capacity. Reset each newly replaced color separately; leave other toner and drum entries alone.
Reset after fitting the new toner 1 Keep the printer on and open the top toner-access cover with the new cartridge already fitted.2 Hold Back/Return and Cancel together for one to two seconds. Release both, then immediately press Back/Return once more.3 Select the replaced color and its capacity on the touchscreen, for example M.TNR-HC for high-yield magenta.4 Choose Yes to confirm. When Accepted appears, close the top cover. Repeat only for other new toners fitted at the same time. If the menu or message differs Stop if the listed controls or toner entry are missing. Close the cover and send Ink Hero your exact model, cartridge number and a photo of the message. A counter reset cannot repair a faulty chip or make the wrong cartridge compatible.
Help with a toner reset Technical references