Use Clear, Start and the arrow keys on this older monochrome DCP panel.
1 min read
These DCP models have no numeric fax keypad. The reset uses the number on the LCD rather than typing a star code. Confirm the exact model before starting.
Reset after fitting the new toner
1With the new toner installed and the printer on, open the front cover.
2Press Clear. If a Replace Drum prompt appears, leave its drum confirmation untouched.
3Press Start, then use the arrow keys to show 11 for standard toner or 12 for high-yield toner.
4Press OK. When Accepted appears, close the front cover and allow the printer to return to Ready.