Canon MAXIFY MB2750: replace a PGI-1500XL ink tank

MAXIFY releases tanks when replacement is required. Follow the screen rather than forcing the holder.

1 min read

Have the correct replacement ready before removing an old tank. Once removed, the same old tank cannot simply be put back to resume normal operation.

Replace the tank shown on screen

With the printer on, open the front cover. Wait until the holder stops at the position for the tank identified on the touch screen.
Push up that tank’s eject lever. Do not remove tanks in other positions.
Prepare the replacement as its packaging instructs, keeping fingers off its contacts and ink interface. Match the slot label and insert it along the guide until it clicks.
Use Next if another replacement is offered. Continue until Exit appears, then tap Exit and close the front cover.
Wait for automatic ink mixing to finish before printing.

Technical references