Toner & drum help HL-2140: recognise new TN2150 toner A Go-button procedure for a new high-yield cartridge in HL-2140, HL-2150N and HL-2170W.
1 min read Use only after fitting new toner Use this supplier counter procedure only after fitting a new, full, compatible toner cartridge and checking that it is seated correctly. Resetting an empty or partly used cartridge will not refill it. Leave the existing drum counter unchanged.
Confirm a new high-yield cartridge 1 Switch the printer off and leave the front cover open.2 Hold Go while switching the printer on. Keep holding until the panel LEDs light, then release Go.3 Press Go twice. Pause briefly, then press Go seven times for the high-yield replacement listed in this guide.4 Close the front cover and check the Toner light. If the original warning remains, contact us. Stop if the controls differ Stop if your exact model, controls or reset menu do not match these instructions. Send us the model, cartridge label and displayed message rather than trying another printer’s button sequence.
Get help with this cartridge Technical references